Kastor KC Modular Pipe Manual de usuario descargar pdf (Pagina 46)

ENGLISH

5. IMPORTANT FACTORS, RULES AND

REGULATIONS

Kastor Chimneys have been designed for use only as a ue

channel for the ue gases emitted by replaces that are used

according to regulations. Emissions that dier from the regula-

tions (e.g. heat, pollutants) may damage the chimney. To

prevent damage to the ue channel, avoid burning plastics or

material that includes plastic (possible creation of hydrochlo-

ric acid, for instance). Various glues may also contain plastic

or other pollutants, which is why glued pieces must not be

burned in the replace.

Always check that the replace and its accessories are in a

condition that ensures clean ue gas. The condition of the

chimney must be checked regularly, i.e. once a month!

In addition to these instructions and ocial regulations, the

instructions given by the replace’s manufacturer must also

be heeded, as well as the limits set by the output of replaces

to various types of chimneys. The temperature of ue gases as

they exit the replace must not exceed 600°C/1112°F for more

than short periods. Sauna stoves can at times produce ue

gases that are this hot.

It must also be noted that according to building codes), chim-

neys must not have extensive horizontal draughts without

assurance of a good draft for instance with a roof exhaust van.

The matters presented in these instructions are valid only for

parts manufactured by Kastor Oy. Kastor Oy does not take

responsibility for cases in which parts from other manufactur-

ers were attached to our systems.

If anything is unclear, we urge you to inquire about them from

your local re inspector or the manufacturer. According to of-

cial regulations chimney res, even extinguished ones, must

always be reported to the re department.

The chimney must be inspected after every chimney re due

to the high temperatures it causes.

Warning: Neglecting these instructions or ocial regulations

may lead to damage in the chimney and res or other hazard-

ous situations.

5.1. WARRANTY

Kastor products are of high quality and reliability. Kastor

grants a warranty of 10 years for manufacturing defects on its

Chimneys. The warranty does not extend to damage caused by

incorrect use or disregard of these instructions. See chapter 3.

5.2. TECHNICAL DATA

The Kastor Chimney has been CE certied according to the

requirements for metal chimneys in SS-EN 1856-1:

Certicate CE 0036 CDP 90286 001

KASTOR CHIMNEY -

EN 1856-1 T600 N1 D V3 L50060 G50

EN 1856-1 T600 N1 W V2 L50060 O50

EN 1856-1 product standard

T600 temperature class

N1 pressure class

D/W condensation class

V3/V2 corrosion class

L50060 material class

G50 chimney re class, safety distance to ammable

structures

T600 Temperature class: The temperature of ue gases in the

chimney may not exceed 700°C/1292°F.

D/W usage classes: The Kastor KC has been certied for the

ue gases of both dry (D, wood and pellet operated) and wet

(W, gas and thin oil operated) replaces and furnaces.

L50060 Material type and thickness: Stainless, acid-proof

steel, 1 mm.

G Chimney re class: The Kastor KC does withstand chimney

res.

The safety distance to ammable structures: 50 mm.

MANUFACTURER

KASTOR OY

Tehtaankatu 5–7

11710 Riihimäki

Finland

Tel. +358 19 764 360

e-mail: info@kastor.

www.kastor.

5.1.

5.2.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Comentarios a estos manuales

Sin comentarios

Kastor KC Modular Pipe Manual de usuario Pagina 46

Comentarios a estos manuales